| Instructor(s) | Dr. Virgilio Valente [Coordinator] Office: ENG450 Phone: (416) 979-5000 x 553728 Email: vvalente@torontomu.ca Office Hours: Tue 1pm-3pm (weeks 2-13) Dr. Sudip Nag Office: EPH 400Q Phone: (416) 979-5000 x 552143 Email: sudip.nag@torontomu.ca Office Hours: Tuesdays 11 a.m. to 01.00 p.m. (https://torontomu.zoom.us/j/91648468354) | ||||||||||||||
| Calendar Description | Introduction to electronics, diodes, linear and non-linear circuit applications. Bipolar junction and field-effect transistors: physical structures and modes of operation. DC analysis of transistor circuits. The CMOS inverter. The transistor as an amplifier and as a switch. Transistor amplifiers: small signal models, biasing of discrete circuits, and single-stage amplifier circuits. Biasing of BJT integrated circuits. Multi-stage and differential amplifiers. Current sources and current mirrors. Important concepts are illustrated with structured lab experiments and through the use of Electronic workbench circuit simulations. | ||||||||||||||
| Prerequisites | ELE 302 and MTH 312 and PCS 224 | ||||||||||||||
| Antirequisites | None | ||||||||||||||
| Corerequisites | None | ||||||||||||||
| Compulsory Text(s): |
| ||||||||||||||
| Reference Text(s): | |||||||||||||||
| Learning Objectives (Indicators) | At the end of this course, the successful student will be able to:
NOTE:Numbers in parentheses refer to the graduate attributes required by the Canadian Engineering Accreditation Board (CEAB). | ||||||||||||||
| Course Organization | 4.0 hours of lecture per week for 13 weeks | ||||||||||||||
| Teaching Assistants | Mohammadreza Maleki (mohammadreza1.maleki@torontomu.ca) | Sections 1,6,11 Anahita Abbasnejad Seresti (ana.abbasnejad@torontomu.ca) | Sections 7,10,16 Francisco Braga (francisco.braga@torontomu.ca) | Section 17 Sam Sorrenti (sam.sorrenti@torontomu.ca) | Sections 14,19 Romina Arabi (romina.arabi@torontomu.ca) | Sections 5,18,22,23 Shihabul Bhuiyan (shihabul.bhuiyan@torontomu.ca) | Sections 4,8,13,20 Shirley Uddin (s1uddin@torontomu.ca) | Sections 3,9,12,21 Sina Keshavarz (mkeshavarz@torontomu.ca) | Sections 2,15 | ||||||||||||||
| Course Evaluation |
Note: In order for a student to pass a course, a minimum overall course mark of 50% must be obtained. In addition, for courses that have both "Theory and Laboratory" components, the student must pass the Laboratory and Theory portions separately by achieving a minimum of 50% in the combined Laboratory components and 50% in the combined Theory components. Please refer to the "Course Evaluation" section above for details on the Theory and Laboratory components (if applicable). | ||||||||||||||
| Examinations | 1. Midterm Exam will be a 1.5-hour closed-book examination in week 7 (after study week) during the lecture time 2. Final Exam will be a 3-hour closed-book examination. The date and time of the final examination will be set by the university. | ||||||||||||||
| Other Evaluation Information | None | ||||||||||||||
| Teaching Methods | 1) Digital drawing tools and in-classroom multimedia teaching facilities will be used for teaching. The lectures will be delivered in person at scheduled times. 2) Lecture notes and recording posted in D2L after each lecture | ||||||||||||||
| Other Information | None | ||||||||||||||
Week | Hours | Chapters / | Topic, description |
|---|---|---|---|
1/2 | 6 | Ch. 2 | Module 1: Op amp non-idealities |
2/3 | 6 | Ch. 4 | Module 2 : Diodes and their applications |
4/5 | 8 | Ch. 6 | Module 3 - Bipolar junction transistors (BJTs) |
6/7 | 8 | Ch. 7 | Module 4 - BJT voltage amplifiers |
8/9 | 8 | Ch. 5 | Module 5 - Metal-oxide-silicon field-effect transistors (MOSFETs) |
10/11 | 8 | Ch. 7, 8 | Module 6 - MOSFET voltage amplifiers |
12 | 4 | Ch. 9 | Module 7 - Differential MOSFET voltage amplifiers |
13 | 4 | Ch. 14 | Module 8: Op amp Filters |
Week | L/T/A | Description |
|---|---|---|
1 | No lab | No lab |
2 | No lab | No lab |
3 | Intro lab | Introductory lab: superposition, DC and AC components of signals |
4 | Lab 1 | Diodes |
5 | Lab 2 | Voltage regulators |
6 | Lab 3 | Common-emitter amplifier |
7 | No lab | No Lab |
8 | Lab 4 | Common-collector amplifier |
9 | Lab 5 | Common-base amplifier |
10 | Project | Mosfet amp design |
11 | Project | Mosfet amp design |
12 | Project | Mosfet amp design |
Students are reminded that they are required to adhere to all relevant university policies found in their online course shell in D2L and/or on the Senate website
Refer to the Departmental FAQ page for furhter information on common questions.
The University Libraries provide research workshops and individual consultation appointments. There is a drop-in Research Help desk on the second floor of the library, and students can use the Library's virtual research help service to speak with a librarian, or book an appointment to meet in person or online.
You can submit an Academic Consideration Request when an extenuating circumstance has occurred that has significantly impacted your ability to fulfill an academic requirement. You may always visit the Senate website and select the blue radio button on the top right hand side entitled: Academic Consideration Request (ACR) to submit this request.
For Extenuating Circumstances, Policy 167: Academic Consideration allows for a once per semester ACR request without supporting documentation if the absence is less than 3 days in duration and is not for a final exam/final assessment. Absences more than 3 days in duration and those that involve a final exam/final assessment, always require documentation. Students must notify their faculty/contract lecturer once a request for academic consideration is submitted. See Senate Policy 167: Academic Consideration.
Longer absences are not addressed through Policy 167 and should be discussed with your Chair/Director/Program to be advised on next steps.
Students are to strictly adhere and follow:
During the lab sessions, to avoid tripping hazards, the area around the lab stations should not be surrounded by bags, backpacks etc, students should place their bags, backpacks etc against the walls of the labs and/or away from their lab stations in such a way that it avoids tripping hazards.
Academic Accommodation Support (AAS) is the university's disability services office. AAS works directly with incoming and returning students looking for help with their academic accommodations. AAS works with any student who requires academic accommodation regardless of program or course load.
Academic Accommodations (for students with disabilities) and Academic Consideration (for students faced with extenuating circumstances that can include short-term health issues) are governed by two different university policies. Learn more about Academic Accommodations versus Academic Consideration and how to access each.
At Toronto Metropolitan University, we recognize that things can come up throughout the term that may interfere with a student’s ability to succeed in their coursework. These circumstances are outside of one’s control and can have a serious impact on physical and mental well-being. Seeking help can be a challenge, especially in those times of crisis.
If you are experiencing a mental health crisis, please call 911 and go to the nearest hospital emergency room. You can also access these outside resources at anytime:
If non-crisis support is needed, you can access these campus resources:
We encourage all Toronto Metropolitan University community members to access available resources to ensure support is reachable. You can find more resources available through the Toronto Metropolitan University Mental Health and Wellbeing website.